This product isn’t currently available for online ordering.
This product isn’t currently available for online ordering.
Out of stock
£9.95
These adapters are used to separate the caliper when changing brake discs to a bigger size, as the new Disc Wave® DB007W with a 223mm outer diameter.
GALFER BIKE is including in the catalogue two models of radial adapters (post mount system) that allow mounting bigger brake discs (20mm to 40mm bigger outer diameter) both front and rear. To mount the new SB001 and SB002 you need four bolts, two fixed to the caliper and two fixed to the fork (front) or the frame (rear). With this system the caliper stays firmly attached and well placed relative to the brake disc, avoiding vibrations and/or torsions that would cause noise while braking and disc deformation.
The adapter SB001 allows separating the caliper to mount brake discs 40mm bigger, while the adapter SB002 allows mounting discs with an outer diameter 20mm bigger. The following table shows the conversion for the new GALFER caliper adapters:
|
REF. |
FRONT (F) |
REAR (R) | ||||
|
PM --> PM |
F |
ø160-->ø203 ø180-->ø223 |
PM --> PM |
R |
ø180-->ø223 | |
|
PM --> PM |
F |
ø160-->ø180 ø180-->ø203 ø203-->ø223 |
PM --> PM |
R |
ø160-->ø180 ø180-->ø203 | |
PM --> Post Mount (Radial)
IS --> International Standard (Axial)
In GALFER we recommend having an expert to mount your adapters as well as not to use axial separators (IS system) for discs bigger than ø180mm. GALFER does not accept responsibility for damages caused by improper installation. The adapter comes with two bolts with washers.
Cheers for stopping by - Keep the wheels spinning!
The Trailhead Bicycle Company Ltd is a company registered in England & Wales with company number 08282918.
Registered office: Emstrey House (North), Shrewsbury Business Park, Shrewsbury, Shropshire, SY2 6LG.
VAT number: GB 151190049.
©2024, The Trailhead Bicycle Company Ltd.
